Jump to content

Screw size for kill switch mounting clamps

Recommended Posts

Hi, I bought a new bike that happened to have the head of the screw that holds the mounting clamps for the kill switch stripped.  It's the standard tiny little screw.  It's for a 2014 yz250, but I can't seem to find exactly what size that screw is.  I'm thinking a 2mm, 2.5mm or so.  It's the same as my KTM. Does anyone happen to know? 

Share this post


Link to post
Share on other sites

Or if you're frugal (cheap) like me, take the mounting clamp to the hardware store with you and fit up the right screw when you're there. Note that the thread is probably metric but could be U.S. standard if it's aftermarket.

Edited by 76xtdrvr

Share this post


Link to post
Share on other sites

I'm going to guess it's a 3x.50 mm. Could be way off base, so Smoking 2's or 76etdrvr have the best solutions.

Share this post


Link to post
Share on other sites

Yep, its a m3.  I was at work and didn't have the screw or clamps with me, so thought I would ask.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×