Jump to content
Sign in to follow this  

Rebound check valve

Recommended Posts

I'm fitting gold valves to my 2000 wr400

RT recommends that a check plate be fitted to the rebound valve. Many years ago I had the forks revalved but they were never any good. When I pulled the rebound apart I had to use a razor blade to take off the valve shims as they were loctighted together ?.

My question is - has the tuner already fitted a check valve to the rebound valve? You can see a shim under the spring and cupped washer, pic as removed from cartridge. 



Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this