Jump to content

Countdown to SuperEndurocross an interview with Beta's Ty Cullins

Recommended Posts

Wonder if the rear of his bikes are higher as his forks are nearly flush. If so many of you have the wrong set up running 3 lines through as endurocross has plenty of tight turns. Would love to know hint hint :)

  • Like 1

Share this post


Link to post
Share on other sites
8 hours ago, MartyMOOSE said:

Wonder if the rear of his bikes are higher as his forks are nearly flush. If so many of you have the wrong set up running 3 lines through as endurocross has plenty of tight turns. Would love to know hint hint :)

Forks at first line (from the top)

sag at 106mm.

Run it the same for everything from EX, MX, to high speed Grand Prix. 

  • Like 5

Share this post


Link to post
Share on other sites
21 minutes ago, ccullins said:

Forks at first line (from the top)

sag at 106mm.

Run it the same for everything from EX, MX, to high speed Grand Prix. 

Chris has Ty experimented with other settings? What type of springs?

Share this post


Link to post
Share on other sites
3 hours ago, Johnny Depp said:

Chris has Ty experimented with other settings? What type of springs?

Yeah. Truthfully he's not all that particular about the sag settings, but doesn't like the forks anywhere else at all. 

Forks springs are 48. Can't remember the shock spring rating off the top of my head. 

  • Like 2

Share this post


Link to post
Share on other sites
On 2017-6-13 at 1:50 PM, MartyMOOSE said:

Wonder if the rear of his bikes are higher as his forks are nearly flush. If so many of you have the wrong set up running 3 lines through as endurocross has plenty of tight turns. Would love to know hint hint :)

mines the same as ty. gives it a massive turning circle rolling in the backyard but there are other ways to get around corners. it needs to be set there or the bike doesnt function as well in EVERY other circumstance

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×