Jump to content

07 kx85 runs, no power band

Recommended Posts

Recently rebuilt an 07 kx 85 with a replated cylinder,pw was completely disassembled and cleaned,vertex piston and rings stock size

Bike fired right up but wont run clean when pw opens, just no hit and bogs. KIPS is properly indexed and actuating when throttle is opened up. Running a br8eg with 32:1  93 octane,h1r oil. Carb is completely clean,filter oiled properly. Reeds seems to be fine, no cracks etc.

Would a bad plug fire right up but not run properly at high revs?

Any insight would be greatly appreciated

Edited by Crustysack

Share this post


Link to post
Share on other sites

Make sure actuator is connected in power valve

Open carb and make sure main jet and pilot jet are installed, don't take this lightly, just ask turbo dan, I believe had this problem

Make sure no paper towel is in the carb, don't take this lightly, just ask me

No rag in air box

Install new plug, try OEM recommended to see if it makes a difference.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×