Jump to content

2016 KTM 450 SX-F / FC450

Recommended Posts

The clutch has been exceptionally loud since day 1 unless it's pulled in. This seems normal but mine was always quite a bit louder then the other KTM's at the track. Right now, I have a significant vibration through the midrange. It doesn't seem to have any unusual noise at any particular location on the motor but it does sound "loose".  It's not there down low and it significantly lessens as the bike climbs past the midrange. There's 61 HOURS on the meter. Any insight would be helpful. I intend to check for frame cracks and make sure there are no loose motor mounts etc. Thank you.

Edited by bnyfe
mispelling

Share this post


Link to post
Share on other sites

Could it be chain slap? The original driveline stuff is usually shot by 60 hours. My 16 clutch rattled when brand new as well.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×