fork adjusters

[bsanderson06]

anyone have an issue with the adjuster not clicking when adjusting? i was making some adjustments the other day and then the adjuster started to free spin. any suggestions?

[Muggins]

The right side on my 15 430rr was doing this. I was able to turn it but it was very hard and not clicking, but felt like it was jumping threads or something. I was heading out on family vaca so I dropped it off at my local dealer to have him check it out and a few other things. I'll let you know what he says. 

[bsanderson06]

On 6/27/2017 at 2:02 AM, Muggins said:

The right side on my 15 430rr was doing this. I was able to turn it but it was very hard and not clicking, but felt like it was jumping threads or something. I was heading out on family vaca so I dropped it off at my local dealer to have him check it out and a few other things. I'll let you know what he says. 

i guess we're the only people to have this issue...

[motoxgiant]

Not uncommon, and not difficult to fix, but you need to remove the fork cap and hope like crazy that the adjuster ball hasn't fallen to the bottom of the fork leg.

[bsanderson06]

i guess the 2013 sachs fork have their own procedure with the fork cap install that i just now found on their support website...... all good now

http://www.betausa.com/sites/default/files/enduroServiceInformation/2013 sachs fork cap info.pdf

 

[David C]

The little brass tip comes loose, had one do the same. You can turn it all the way on hard and hope it screws itself back in.
It will not fall out since its pressed against the rod.
Anyway call your dealer or Beta usa and order a new rebound cap. I payed $97 for mine.