Jump to content

2006 KX250 Cylinder Breathing hose

Recommended Posts

Hello guys,

 

On my 2006 KX250, I replaced the entire cylinder and did not order the breathing hose fitting that goes into the left side of the cylinder. 

Anyone have ideas or methods on removing it? It is currently sitting in penetrating fluid, would NOT turn or come out with vice grips and dont want to ruin it (will take 2 weeks for me to get a new one). 

c1040f66f422779c304621e9eff9ff47.gif

Share this post


Link to post
Share on other sites

Best thing you could do id say is trying heating up around it and pray lol that it doesn't break 

Edited by Motox367

Share this post


Link to post
Share on other sites

Going by what it looks like close up - - id say its probably just pressed in with maybe some loctite - insert something in the end the same diameter - then using heat and vice grips twist it out

 

 

kx1.jpg

Share this post


Link to post
Share on other sites

Looks like a press fit to me, apply some heat around where it is mounted and see if you can pull it out.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×