Jump to content

2012 250SX 2017 Plastics

Recommended Posts

Saw these pics on a local classified ad for a 2012 250SX. First time I'd seen this done and a pretty nice job!

https://orangecounty.craigslist.org/mcy/d/ktm-factory-edition-stroke/6218203139.html

2012 250 sx
$4800 OBO
***330 big bore ***
Fresh shock therapy suspension
Super motor built by Bill Thomas
Big Bore specialist Eric Gore
Super pro ported and dyno tuned by *Terry Varner* and *David Cincotta *
39mm carb
Oversized fly wheel
Power valve work by Terry Varner
HGS pipe and blue titanium muffler
Pro Taper locking bars
New chain and sprockets
Two ignition boxes 250 sx and 300
Balanced crank and piston
Factory Edition triple clamps
Orange powder coated frame
Raptor $400 titanium foot pegs
Warp 9 elite wheels
Heavy duty stainless spokes
Billet hubs orange anodized
2016 factory edition plastic
Suspension link
So much more not listed.

01616_3qMNysn2Pwx_1200x900.jpg

00F0F_3v2Iip9v6FN_1200x900.jpg

00202_auFYMy12Ybj_1200x900.jpg

  • Like 1

Share this post


Link to post
Share on other sites

great job hes done there. its amazing how ktm after all these years and frame variations , the plastics and subframe can all swap over so easily. a few years ago i fitted 2013 tank/plastics/subframe to a old 96 bike. 

also done a 2008 conversion on a 2003 and a 2004 to a 1998. its brilliant 

  • Like 1

Share this post


Link to post
Share on other sites

So I guess he is using a 2016 factory frame..? Subframe mounts is totally different so either change mounts or new frame. 

Nice work but hardly "amazing" considering what has to be done. 

Share this post


Link to post
Share on other sites
1 hour ago, Wessmen said:

So I guess he is using a 2016 factory frame..? Subframe mounts is totally different so either change mounts or new frame. 

Nice work but hardly "amazing" considering what has to be done. 

According to the advert it's a 2012 frame with 2016 450 plastics, subframe fitted

Share this post


Link to post
Share on other sites
27 minutes ago, sandking11 said:

According to the advert it's a 2012 frame with 2016 450 plastics, subframe fitted

Well it doesnt fit without tank, seat, subframe and frame mods. Look at the difference where it fastens on the frame, easily 10cm up/down. 

Share this post


Link to post
Share on other sites

 

That's the point. He's  made the tank fit with a new mount and welded new tabs so the 2016 subframe will fit.

So going back to what you said about his work being 'hardly amazing ' , he's actually done a good job of fitting all the later parts to his bike.

 

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×