Jump to content

Cr80 kickstart

Recommended Posts

I can't get the kickstart assembly to work. I can kick the bike but the kickstart won't return. Can someone link me to an installation video or give me instructions on how to do it? Thanks!


I dont have a link to a video but there are 2 holes on the starter spindle. If you put the end of the spring into the wrong hole, (the hole thats visible at top), you wont be able to pretension it. It goes in the hole under the starter spindle on left side, not the hole on top. Hope this helps.

Share this post


Link to post
Share on other sites

I dont have a link to a video but there are 2 holes on the starter spindle. If you put the end of the spring into the wrong hole, (the hole thats visible at top), you wont be able to pretension it. It goes in the hole under the starter spindle on left side, not the hole on top. Hope this helps.

Thanks a ton. I didn't know that and I definitely have it in the top hole. I'm going to try to put it in the bottom one now.
  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×