Jump to content

What lenght are DZUS fasteners on the airbox?

Recommended Posts

1" from the top of the head to the tip

the head itself is 1/8" thick ---- so maybe the shaft length is 7/8"

Share this post


Link to post
Share on other sites

i measured mine, but what I'm unclear on is whether you measure to the top of the thread or the bottom. Seems they must be 15mm or 17mm, but I'm not sure what the convention for top or bottom of thread is.

Share this post


Link to post
Share on other sites

usually with bolts, you measure just the shank only, the head isn't included....

  • Like 1

Share this post


Link to post
Share on other sites

ok, so kurveygurl shows them being measured from the underside of the head (like a regular bolt) to the center of the "threads"

Dzus%20-%20D8%20D-Ring%20-%20Drawing%20-

so by that reasoning, they are 3/4"

also, ebay has some for the drz400s, if you want to look into that route... they are quite expensive though, but if you really want them, gotta pay to play ;)

Edited by 74jimbo
  • Like 1

Share this post


Link to post
Share on other sites
2 hours ago, 74jimbo said:

ok, so kurveygurl shows them being measured from the underside of the head (like a regular bolt) to the center of the "threads"

they are quite expensive though, but if you really want them, gotta pay to play ;)

......I wanna play................................ :smirk:

Share this post


Link to post
Share on other sites
4 hours ago, 74jimbo said:

ok, so kurveygurl shows them being measured from the underside of the head (like a regular bolt) to the center of the "threads"

Dzus%20-%20D8%20D-Ring%20-%20Drawing%20-

so by that reasoning, they are 3/4"

 

3/4= .75 X 25.4 = 19mm  :thumbsup:

42 minutes ago, Backwoods-Bomber said:


Come on Ken, open them purse strings. Lol.
 

I think black would look nice against yellow, huh Scott? :cool:

  • Like 1

Share this post


Link to post
Share on other sites

 

On 8/6/2017 at 5:12 PM, Bermudacat said:

i measured mine, but what I'm unclear on is whether you measure to the top of the thread or the bottom. Seems they must be 15mm or 17mm, but I'm not sure what the convention for top or bottom of thread is.

 

On 8/6/2017 at 5:27 PM, 74jimbo said:

ok, so kurveygurl shows them being measured from the underside of the head (like a regular bolt) to the center of the "threads"

Dzus%20-%20D8%20D-Ring%20-%20Drawing%20-

so by that reasoning, they are 3/4"

also, ebay has some for the drz400s, if you want to look into that route... they are quite expensive though, but if you really want them, gotta pay to play ;)

 

On 8/6/2017 at 10:02 PM, Bermudacat said:

3/4= .75 X 25.4 = 19mm  :thumbsup:

I think black would look nice against yellow, huh Scott? :cool:

 

On 8/8/2017 at 4:30 AM, Bermudacat said:

Order placed. I'll report back when they arrive.

Ok, seller measured the overall length rather than the engagement length as Jimbo illustrated with his research.

Message sent............................... :(

Share this post


Link to post
Share on other sites

Ok,

Refund from EBay seller for the short fasteners.

DRZ400 working length, according to KurveyGurl is 21mm. Order placed with KG; $25 for three.

So, if your adding side covers, budget $10 for heat shield and $25 for fasteners. :o

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×