Bike vibrates more after jetting change??

[kxkid110]

so i changed my jetting a little bit leaner, and now my bike vibrates a ton more. does this have to do with the jetting change and is it bad?

[Jekel]

try adjusting your air screw and idle with jetting changes to smooth it out. If no help there, go back in and make sure you got the carb back together right. 

[Jekel]

Any results yet?

 

[trjc27]

i am thinking that the problem is not that, i also took the front end apart to re grease the steering bearings at the same time as i did the jetting and i believe that i may have not assembled it right or may have lost a part or remounted the handle bars wrong

[Jekel]

does it vibrate more riding it or idle on a stand. 

[LSHD]

2 hours ago, trjc27 said:

i am thinking that the problem is not that, i also took the front end apart to re grease the steering bearings at the same time as i did the jetting and i believe that i may have not assembled it right or may have lost a part or remounted the handle bars wrong

I troubleshoot complex equipment for a living. As usual, "the rest of the story" comes after the initial report, and the cause is obvious. ??

[trjc27]

found the missing o ring, installed it and the problem is solved [emoji51]

[Jekel]

good for you