Jump to content
Sign in to follow this  

Front spring swap

Recommended Posts

2014 400s

Bought some racetech front springs using there calculator for my weight. Is it a direct swap with the factory springs or are they different lengths. Included in the package was 6 shims, about 1/2 inch total per side I'm assuming for sag adjustments. What can you tell me, thanks....

Share this post


Link to post
Share on other sites

usually you want about 10mm spring preload, give or take 5.  Start there see how it is, kind of difficult check sag on forks

Share this post


Link to post
Share on other sites

I would start with 20mm of preload and then check the sag settings. It's preferred to shorten the pvc spacer to the correct sag then adding a stack of washers. 

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×