Jump to content

Kickstart shaft

Recommended Posts

Hey everyone, the other day my kickstart shaft decided to break on me on my 20170918_152022.jpg99 kx250, can't seem to find anything available online. Does any other year or model could possibly work that you know of? Thanks in advance

Share this post


Link to post
Share on other sites

99-01 use the same shaft, earlier models may work but the part numbers don't cross over.  02 and later use a larger and stronger shaft but you would need the side case and matching kick lever as well.  Would probably be worth it to upgrade.  02-04 would work.

Edited by turbo dan
  • Like 3

Share this post


Link to post
Share on other sites
99-01 use the same shaft, earlier models may work but the part numbers don't cross over.  02 and later use a larger and stronger shaft but you would need the side case and matching kick lever as well.  Would probably be worth it to upgrade.  02-04 would work.

Would a kick start shaft off a 98 125 work? Parts numbers
Kx250: 13066-1099

Kx125:13066-1101

Share this post


Link to post
Share on other sites

I doubt any 125 parts would fit.  Almost no chance.  Only 250 stuff.  That's what I assume yours is.  Looks like one.

  • Like 2

Share this post


Link to post
Share on other sites

Ok I just went through this a few months ago , that Kickstarter shaft for 99.00.01,kx250 is next to impossible to find you can use one off a 98 ,97 and so on. The kx250 has the same kicker from 94-01 I believe ,I used a 98 in a 01 only thing I did was swap the lil clip from my old one onto the 98 seems like the 99-01 shaft was very hollow that bolt hole snaps off I've seen like 4 now break .

 

 

  • Like 2

Share this post


Link to post
Share on other sites

I have a customers bike in the shop for the same thing. 2000kx250. got a 98 kickstarter shaft for it and will see how that goes. I have a 99kx250 also , so I am seeing if this works, then will get another for spare.

  • Like 2

Share this post


Link to post
Share on other sites

Got it back together in no time. Easy job, also found out it has Hinson clutch basket in it! Bonus! Thanks for the info guys

  • Like 1

Share this post


Link to post
Share on other sites
On 9/25/2017 at 10:50 PM, Michael1979 said:

 

Hey everyone, the other day my kickstart shaft decided to break on me on my 20170918_152022.jpg99 kx250, can't seem to find anything available online. Does any other year or model could possibly work that you know of? Thanks in advance

 

I just fixed mine 2001 kx 250 (13066-1099) can not get one. I found one 2002 kx 250 (13066-1107) this is what I did. the gears and snap rings fit as they should, the shaft that goes out to the kick lever is thicker so I popped out the seal (with out damaging it) then drilled the case out to 13/16 the new shaft was a little tight made  32 second bigger shaft fit perfect new gasket put case back on bolted, put the seal back using a socket. then ordered a new boss to fit the shaft (Boss 13061-0057) 68.00 the 01 kick lever is the same, now I'm going riding Sunday  most likely will not brake again much thicker shaft...

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×