2001 DR200SE turn signal problems

Hi there,

I bought a 2001 DR200SE a few weeks ago and it was missing a turn signal so I replaced it. Now the right side when turned on just stays on and doesn't blink. The left side does the same but the front left bulb doesn't go on, I think that might just be a bad bulb. Could this be a relay problem?

 

Thanks,

 

Maddie

Start by making sure you have the correct bulb in each and that they all work.

Hi there,
I bought a 2001 DR200SE a few weeks ago and it was missing a turn signal so I replaced it. Now the right side when turned on just stays on and doesn't blink. The left side does the same but the front left bulb doesn't go on, I think that might just be a bad bulb. Could this be a relay problem?
 
Thanks,
 
Maddie

The circuit can be cut somewhere make sure all wires are connected and are frayed.

If the blinkers are on solid it would indicate a faulty blinker relay. I recommend buying the shop manual for the DR200SE which I did. I think it’s about $60 and I find it indispensable. I’ve had to work on the carburetor for instance and couldn’t have done it without the shop manual. The same with valve clearance adjustment.

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!


Register a new account

Sign in

Already have an account? Sign in here.


Sign In Now