Jump to content

2001 xr650l Intake boot?


Recommended Posts

The rubber boot on my carb slides over the rubber boot that is bolted to the engine. 

My question is did all 650l's come with this 2 piece intake or is mine aftermarket or could the rubbers have seperated?

I have never seen a 2 piece intake on any other bike.

The 2 piece setup I have now causes a major airleak and must be siliconed together in order to run.

thanks,

Josh

Link to comment
Share on other sites

I just recently got the bike. It has been sitting up awhile.

It wouldn't even idle on full choke without the silicon.

With the silicon it will idle well on choke, but starts poppin off choke. May still be a little air leak.

However the pilot is a 50 which seems a little small for the Southeast at sea level. The engine is also getting hot pretty quickly at idle.

Anyone in the southeast know the jets they are running? It also has an xrs only pipe and looks like a k and n filter.

I am going to order the intake and would like to order an assortment of jets at the same time.

Link to comment
Share on other sites

  • 3 years later...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

×
×
  • Create New...