Jump to content

XR600 seal Identification needed

Recommended Posts

But there is only one of these seals in the kit and 4 different green ones that look like valve seals? and the center hole in it is about an 1/8th of an inch in Dia.?

 

Edited by Gilligans Isle
added text

Share this post


Link to post
Share on other sites
But there is only one of these seals in the kit and 4 different green ones that look like valve seals? and the center hole in it is about an 1/8th of an inch in Dia.?

 

You have a pic of the green ones? There needs to be x4 valve seals in the kit. Maybe the green ones are the valve seals intended to be in the kit, and the brown one was an anomaly that made it’s way into your kit accidentally? — It’s still a valve seal, though, regardless.

Share this post


Link to post
Share on other sites

Looks like an extra one in the pack that wasnt sposed to be there - it happens

Share this post


Link to post
Share on other sites

Ok, the green ones are definitely your Valve Stem Seals. The brown one looks like a valve stem seal off of a smaller bike. Can someone else speak to this?

IMG_8315.jpg

Share this post


Link to post
Share on other sites

Okay thanks guys. Mine is an 86 xr600r, I was thinking it went in the plunger system on the oil pump as that was the only part on the parts fiche that even looked remotely like this seal . :)

Edited by Gilligans Isle

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×