Jump to content

cant replace engine kill switch .

Recommended Posts

my kill switch is not working and i had bought a new one , My problem is that , i cant disconnect the OEM kill switch . is it a trick to disconnect it !? 

 

plz Help :D

Share this post


Link to post
Share on other sites

They can stick as you know.  No trick just make sure you grab each end and pull. Maybe some needle nose pliers? Twist the ends a bit as you pull.

Spray some penetrating oil or WD-40 in there if you need to.

Edited by HRC27
  • Like 2

Share this post


Link to post
Share on other sites
7 hours ago, HRC27 said:

They can stick as you know.  No trick just make sure you grab each end and pull. Maybe some needle nose pliers? Twist the ends a bit as you pull.

Spray some penetrating oil or WD-40 in there if you need to.

thank i will try :D . they have stock together like a one pice . 

Share this post


Link to post
Share on other sites
On 3/19/2018 at 9:44 AM, Vaporize said:

Make sure You undo the tab at the same time You pull..

 

undo the tab !? there is a tab which i press in. but what do you mean by undo the tab !?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×