Jump to content

Kick start spring help please

Recommended Posts

Hi all, picked up a 88 rm250, it's got a dr350 engine in it, been tinkering and it's running great, but the kick start doesn't spring back, I've taken off the clutch cover and there no spring, or guide, and looking online there should be a hole on the casing that the spring should sit into, there is a hole in the shaft so I get that end, but the other end? Does it sit into the clutch casing??

 

Confused!!

IMG_20180403_192916414.jpg

IMG_20180403_192851908.jpg

IMG_20180403_192703268.jpg

Share this post


Link to post
Share on other sites

Its an SP370 made for 2 years 78 & 79

 

  • Like 1

Share this post


Link to post
Share on other sites
Posted (edited)

Going by the kickstart diagram - the spring is behind the Drive Gear at the other end of the shaft

3f0994a2cadb7313ea4ff6ccaaea5a815a65c085.thumb.png.da42dd5068f8468401e67647d4c20a6e.png

Probably good idea to buy a workshop manual for it

Quite a few on ebay

Edited by S.O.A.N.Z

Share this post


Link to post
Share on other sites

Yeah I was just looking at a diagram exactly same as that one, that's a bugger, can see why they didn't continue the engine, every other kick start spring is on the outside, I'm gonna have to get a manual!!!

Thanks Soanz

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×