tonkaman

Beta Xtrainer brake pedal height

8 posts in this topic

I’m completely in love with my Xtrainer, but there’s one thing that I can’t figure out. Why do the brake pedals sit up so high? At first I thought my stock pedal was bent, so I swapped it for a Boano one. When that didn’t fix it I looked around at other Xtrainers and realized they are all the same.

 

IMG_5983.JPG

 

Notice that this is adjusted DOWN as far as possible! I’ve even removed the jam nut behind the Clevis for extra adjustment. As it sits in its lowest position it’s still about 1 inch above my foot pegs. This causes me to ride with my foot beside the brake instead of covering it, and one day it will cause a wreck.

 

Does anyone have any idea how I can improve this? Could there be something I’m overlooking? Are you guys experiencing the same thing?

Share this post


Link to post
Share on other sites
You have to make your own customimzed pedal and 'up-stop'.
Mine has 20mm lowered pegs, so it was reaaaallly high to begin with....
 
IMG_6769.thumb.JPG.94d3c1bd40c9443dd5aef50085952a87.JPG
IMG_6770.JPG.aa9c604ccf91ee2f69f6027e110c793d.JPG
IMG_6785.JPG.7b0b10fe9ebff9bd0fdedb456d96e6e3.JPG
20170408_181521.jpg.6378d5a6d147351fe088272aaf8b25e8.jpg


Awesome ideas, thank you! I read through your other post and will shorten up that actuator rod as well.


Thank you for the links! They were very helpful

Share this post


Link to post
Share on other sites

Can you get your boot on the upper step cleats with this configuration?  When I first read this thread I looked at these stepped pads with some interest... until I realized that the upper step step doesn't extend far enough beyond my clutch cover to reliably pick it up with by boots when riding while standing.  Just curious if your bike is different for some reason.  Mine is the stock pedal.

20180419.jpg

Edited by wwguy

Share this post


Link to post
Share on other sites

What I found taking a class with Graham Jarvis is that for many of the techniques a high pedal for a hard brake when your on the rear of the seat is almost necessary.  I typically have my brake low so I don't heat it up dragging and I had some problems with that until I readjusted it.  So, two different setups really.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with: