CRF110 Low Seat

[yellow_busa]

Does anyone make a lower seat for the CRF110 that you can buy outright? Don't want to ruin stock seat by messing with it.

[CRF James]

The seat height already about as low as a crf70. I don’t think you’re going to find any options as most the time people are trying to raise the seat height on those bikes.

[CRF James]

I assume you want to lower it for your son/daughter and don’t want to shave a perfectly good OEM seat. Maybe pick up a cheap chinese seat to shave down and keep the OEM seat to throw back on when he or she is ready.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162282374490

[yellow_busa]

On ‎9‎/‎24‎/‎2018 at 6:02 PM, CRF James said:

I assume you want to lower it for your son/daughter and don’t want to shave a perfectly good OEM seat. Maybe pick up a cheap chinese seat to shave down and keep the OEM seat to throw back on when he or she is ready.
https://rover.ebay.com/rover/0/0/0?mpre=https%3A%2F%2Fwww.ebay.com%2Fulk%2Fitm%2F162282374490

That is a great idea and this version is not expensive. Thanks

[RenatoG]

What I did for my son when he was too short for the CRF50 was the following:

• Remove the entire seat
• Remove the staples from the leather of the cushion and remove the seat cover (leather and cushion) entirely
• Add an adhesive foam pad to the bare seat (https://www.ebay.com/sch/i.html?_from=R40&_trksid=m570.l1313&_nkw=adhesive+foam+pad+motorcycle&_sacat=0&LH_TitleDesc=0&_osacat=See-All-Categories&_odkw=adhesive+foam+pad)

When they get older and taller, just staple the seat cover back to the seat assembly