Jump to content

TT350 1987 front forks

Recommended Posts

Just put new seals and oil in my tt350 and the bottom part of the stroke seems fine but the top 1/3 is just spring no dampening and it tops out really hard is this normal for these old girls???

I used 15w fork oil and put in 135ml

Thanks guys.

IMG_6782.JPG

Share this post


Link to post
Share on other sites

Sounds too little oil ?

Share this post


Link to post
Share on other sites

The Race Tech info page on that bike suggests not a specific volume but a measured oil height: 130mm from the top

Perhaps you mixed up units:  cc's / mm's 

Edited by mlatour
  • Like 4

Share this post


Link to post
Share on other sites
The Race Tech info page on that bike suggests not a specific volume but a measured oil height: 130mm from the top
Perhaps you mixed up units:  cc's / mm's 


Aaarrrr I see where I went wrong
Thanks.
  • Like 1

Share this post


Link to post
Share on other sites

So it was 130mm from the top, the forks work much better haha.

  • Like 2

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×