98 Yz250 hand levers

[Colton Lee Doyle]

I have a 98 yz250 and have had problems with broken clutch handles... I want foldable clutch and brake handles but I can only find them for 2010 and newer. Any idea where I can find some or if the newer handles will fit my older bike?

[ar2stroke]

8 minutes ago, Colton Lee Doyle said:

I have a 98 yz250 and have had problems with broken clutch handles... I want foldable clutch and brake handles but I can only find them for 2010 and newer. Any idea where I can find some or if the newer handles will fit my older bike?

This will work from Rocky Mountain you may want to call/confirm to be 100% sure. It may be a good idea to put some hand guards on there (bark busters) and then you can just run the stock levers. 

The controls always get messed up when you take a spill and cost a lot of money to fix.

https://www.rockymountainatvmc.com/p/1036/57718/Tusk-D-Flex-Handguards-with-MX-Shields

https://www.rockymountainatvmc.com/p/3116/32744/ASV-C6-Series-Pro-Clutch-Lever?v=2262

[EmpireofDerp]

If you're not riding mx, put some hand guards on, flag style or full wrap.

[Colton Lee Doyle]

I really pretty much only ride mx

[ar2stroke]

2 hours ago, Colton Lee Doyle said:

I really pretty much only ride mx

https://www.rockymountainatvmc.com/p/3116/32744/ASV-C6-Series-Pro-Clutch-Lever?v=2262

That is the Clutch one you might shop around to see if they got a Brake Lever that will work (or find another Brake Master cylinder that allows the break away lever).