Jump to content
Sign in to follow this  

YZ compression adjuster o-ring

Recommended Posts

Yesterday I started rebuilding my 05 yz250 shock.  Was putting it back together when I broke a o-ring.  Ive looked all night and morning and still have not found a place to order the o-ring. Is this something I need to get from KYB or can I source it out at the local hardware store?

IMG_1087[1].JPG

IMG_1088[1].JPG

IMG_1089[1].JPG

Share this post


Link to post
Share on other sites

According to the Technical Touch / KYB catalog that should be

part # 120080000101, compression adjuster piston o-ring

 

Before contacting Technical Touch USA or a suspension parts vendor,

if you have an industrial hydraulic repair shop local to you, ask them for a 1.5mm x 25mm OD  o-ring.

Edited by mlatour
  • Like 1

Share this post


Link to post
Share on other sites

So, I have found two different size o-ring's.....

2mm x 25mm and another that is

1.5mm x 25.5mm at my local machine shop. Would I be ok using either of these?

 

Share this post


Link to post
Share on other sites

I would try the 25.5 X 1.5 ,o rings have a decent tolerance of around 5% anyway ,buy a few

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...