YZ compression adjuster o-ring

[fox007]

Yesterday I started rebuilding my 05 yz250 shock.  Was putting it back together when I broke a o-ring.  Ive looked all night and morning and still have not found a place to order the o-ring. Is this something I need to get from KYB or can I source it out at the local hardware store?

[mlatour]

According to the Technical Touch / KYB catalog that should be

part # 120080000101, compression adjuster piston o-ring

 

Before contacting Technical Touch USA or a suspension parts vendor,

if you have an industrial hydraulic repair shop local to you, ask them for a 1.5mm x 25mm OD  o-ring.

Edited December 2, 2018 by mlatour

[mlatour]

Edited infos, mixed up with body o-ring

[mog]

Make sure it's viton

[fox007]

thanks guys

[azdragoon]

These guys will have it.  http://racetech.com/page/id/33

[fox007]

So, I have found two different size o-ring's.....

2mm x 25mm and another that is

1.5mm x 25.5mm at my local machine shop. Would I be ok using either of these?

 

[mog]

I would try the 25.5 X 1.5 ,o rings have a decent tolerance of around 5% anyway ,buy a few