Jump to content

Pinched shim stack!

Recommended Posts

So i was revalving my mid valve on my xplor fork on the rebound side i pinched the compression shims while tightening the bolt, I could see the had a groove in them so i re flattened them with my vise utilizing two pieces of flat aluminum. My question is are these shims garbage or are they ok?

Share this post


Link to post
Share on other sites
So i was revalving my mid valve on my xplor fork on the rebound side i pinched the compression shims while tightening the bolt, I could see the had a groove in them so i re flattened them with my vise utilizing two pieces of flat aluminum. My question is are these shims garbage or are they ok?
Garbage
  • Like 4

Share this post


Link to post
Share on other sites

Right to the point, I appreciate it and new shims on the way!

  • Like 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×
×
  • Create New...