William Noble Posted September 28, 2019 Hey all I am looking at getting an led light for the yz 250f 2011 I cannot find any specs on the stator to see if it has any spare power to see if it can handle 18watt LED .Has anyone done this or do you need a stator upgrade and new electrical harness Share this post Link to post Share on other sites
Vintage Not Pimpage Posted September 28, 2019 (edited) Small coil rewinds and maverick make rec reg kits to fit carby bikes. They use a capacitor to store energy from the pulse coil and can power the small LEDs supplied in the kits. If you want to run a decent headlight you will need to upgrade the stator. I'd also consider a total loss system using a lipo battery if you only need a few hours light. Edited September 28, 2019 by Vintage Not Pimpage Share this post Link to post Share on other sites
William Noble Posted September 28, 2019 28 minutes ago, Vintage Not Pimpage said: Small coil rewinds and maverick make rec reg kits to fit carby bikes. They use a capacitor to store energy from the pulse coil and can power the small LEDs supplied in the kits. If you want to run a decent headlight you will need to upgrade the stator. I'd also consider a total loss system using a lipo battery if you only need a few hours light. Thanks ? Share this post Link to post Share on other sites