TDHunter99 Posted September 30, 2019 Hey guys, title says it all. I bought my '02 400s secondhand, and the previous owner had the suspension adjustments setup differently, and I wanted to set everything back to the stock settings. I started by maxing out the rebound adjustment, and then backing it off. the right side went fine, but on the left side I maxed it out, and then was 4 clicks back off and the screw head snapped off. Im not sure what I can do at this point. I don't want to leave it that tight, and I don't want the forks to be uneven. Any suggestions would be helpful. Thanks all. Share this post Link to post Share on other sites
rustynut2 Posted September 30, 2019 (edited) Time for a new cap. Edited September 30, 2019 by rustynut2 Share this post Link to post Share on other sites
TDHunter99 Posted October 1, 2019 That doesn’t seem too bad. Any ideas on where I can get one? Share this post Link to post Share on other sites
rustynut2 Posted October 1, 2019 partzilla, rocky mountain atv , bike bandit any suzuki or kaw dealer Share this post Link to post Share on other sites
TDHunter99 Posted October 1, 2019 Awesome. Thanks for the help. Share this post Link to post Share on other sites