Jump to content

Fuel and air adjustment screws?

Recommended Posts

I have a 2005 yz125 and I messed up the idle screws. I have a making carb and i just want to know what the base idle is for the fuel and air adjustments. I run 35/1 if you can tell me what i should do would be great!

Share this post


Link to post
Share on other sites

There is no nominal number of turns to set the idle speed screw.

My 2010 YZ125 (same engine as you) service manual simply says to bring the engine up to normal operating temperature (not idling but riding)

and, then set the idle speed to the lowest rpm the engine will idle without stalling.

 

The air screw is typically set between 1.5 and 2.5 turns out,

any more/less is an indicator that your pilot jet is incorrectly sized. 

Edited by mlatour
  • Helpful 1

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×
×
  • Create New...