Jump to content

CR125R Throttle setup

Recommended Posts

So I have a 98 cr 125 and I ordered a new throttle casing and throttle cable the cable is the right size but it won’t screw into my throttle casing so I have the wrong casing it’s too small for the cable so how do I know what size casing I should get? I’m sorta a newb lol so any info helps

Share this post


Link to post
Share on other sites
2 hours ago, Jessie Edge said:

So I have a 98 cr 125 and I ordered a new throttle casing and throttle cable the cable is the right size but it won’t screw into my throttle casing so I have the wrong casing it’s too small for the cable so how do I know what size casing I should get? I’m sorta a newb lol so any info helps

Everything but the cables is available OEM. I've used Motion Pro cables for years with good luck. Matched up to the stock housings perfectly.

Look under the Handle Lever fiche for your bike.

Motion Pro makes replica housings w/throttle cable too. No idea if the make them for your bike.

https://www.partzilla.com/catalog/honda/motorcycle/1998/cr125r-a

 

MjAzMTYwNA-17729cad.png

Edited by HRC27

Share this post


Link to post
Share on other sites

Per Motion Pro's site, they're sold separately. You have to use their 01-0713 cable with their Vortex throttle housing for example.

If you have one of their housings, buy the matching cable.

If you bought a cheap housing off ebay, that's your issue. At least get a Motion Pro and it's matching cable.

https://www.motionpro.com/product/01-0713

https://www.motionpro.com/product/01-0054

073213f866e4695e5381635c4ece2f6ad498892f3b238bf6f181e0136911ddcb.jpg

Edited by HRC27

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:


×
×
  • Create New...