2StrokeGasGas 2019 EC 300 Starter Issues

[Marco Lopes]

2 hours ago, dh3000 said:

Make sure, 20,21,22,14 are out first. The 20 gear will prevent the group you mentioned from removal. Once, those are removed, in theory, you can pull on 16 to bring that whole assembly out. It's not easy. I tried all the tools I could think of, heat, freezing etc. I could not get it out. I asked the guys at Moto Center for advice and they recommended drilling a small hole in the back of the case behind 26 and tapping out with a punch from the other end. This is what I did. Whatever way you get it out, make sure to replace the bearing as well (18.)

(Edit: this next part is if you weren't replacing the case) 

Once you have it all back together, a dab of quicksteel or JBweld is more than efficient to seal the hole. The hole and JB weld are hidden from plain view.

I know this isn't the ideal solution but after 50 hours it has held up great. 

i am having problems removing the 20 e 21 part any tips?

[dh3000]

7 hours ago, Marco Lopes said:

i am having problems removing the 20 e 21 part any tips?

I don't remember exactly what I did there but you could try leveraging or prying from the bottom side up through where 16, 17, 18 are. If they don't come out easily and you have to use a little force, make sure you replace the bearings.