Jump to content
Sign in to follow this  

Need your advise on fcr jetting

Recommended Posts

Hello guys,

I ride a lc4 400 sm. Current carb settings:

needle:ocemn

clip:#4

main:160

pilot jet:48

FS: 2 turns out

Ride at sea level and the weather is still hot (summer)

Other mods: Akra full system & K&N airfilter fitted in the stock airbox with some mods (open top)

Problem: The bike runs fine,idles fine and the sparkplug colour is right.

I notice however a small burbling when a open the throttle quickly, mainly from the 3rd gear and up.

If i turn the fs at 1 & 1/2 turns it gets worse - if a turn it over 2 turns the bike idles very bad. So i think that this is not the case. I went to 165 main from 160, nothing.

I am thinking of setting the needle to #3, but i am not sure if this is the problem's base.

Any suggestions?

Thank you

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×