Jump to content
Sign in to follow this  

Home Made Exhaust Tip

Recommended Posts

I made an exhaust tip using a piece of automotive exhaust pipe adapter for a small 4 cylinder car the pipe was 1 1/2 and expanded to 1 5/8 or 1 3/4 I cut the big end on about a 45 degree angle cut the small end down enough to fit about an inch into the spark arrestor Then I took the end cap off my bike cut the three welds to take the screen off. Using a holesaw on the :thumbsup:end cap I cut a 1 1/2 hole in the center welded the new pipe in from the backside slid the old spark arrestor over the new pipe and spot welded it back on made sure it fit painted it black and put it on sounds awsome cost me $2 bucks for the pipe about an hour of my time and now my TTR 125 sounds like a YZF 250 or 450 I will try and get pictures just got to install camera program

Share this post

Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this