Jump to content
Sign in to follow this  

What type of adhesive to re-stick graphics

Recommended Posts

I replaced the stock plastic and graphics on my bike and the radiator shroud graphics are already starting to lift.

Can someone recommend a good adhesive to stick them back down?

Greg

Share this post


Link to post
Share on other sites

I second the 3M 77 spray adhesive. Just don't expect it to work on the tank. I don't think anything does :cry:

Share this post


Link to post
Share on other sites

It will if your decal has holes in it for the gas vapors to escape!

I reused some YZF graphics using 3M spray adh. and was surprised how long they lasted. :cry:

I wiped the tank down with Acetone then masked and sprayed the tank with the adh. then sprayed the graphic. Let it sit a bit then stuck the graphic. Clean up any over spry with the Acetone.

Share this post


Link to post
Share on other sites

Sounds like 3M 77 is the way to go. Is that available at places like Home Depot? I hate getting into and out of a place like that and prefer to not waste a trip.

Thanks for the recommendation and confirmations.

Greg

Share this post


Link to post
Share on other sites

The 3M 90 IS very good stuff. Just did a little patch job where my graphics had come lose. That stuff is great!

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×