Jump to content
Sign in to follow this  

FCR Jetting Question

Recommended Posts

I got one small problem. When I twist the thottle "hard" from idle the bike stalls. I thought lean needle position. Everywhere else in the thottle positions the bike runs fine. I started with #3 on blue needle then went to #4 still dies then to #5 still dies. Any suggestions. Here is what I got now:

100-500 feet

155 Main

Blue #5

Pilot 38

PAS 75 @ 5/8 turns

Fuel Screw 2 turns

Thanks

Share this post


Link to post
Share on other sites

No while riding it's fine. Bike idling in neutral and I quickly snap the thottle the bike stalls. From idle and stopped in 1st quickly snap thottle very very (almost not noticable) slight hesitation then takes off like a rocket.

Share this post


Link to post
Share on other sites

any bike (including mine) with a fcr will stall when you wack the throttle wide open in nuetral.you have to jet for waht it does while riding it.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×