Jump to content
Sign in to follow this  

Need Pink Wire Mod Instructions...Rick Ramsey site is down

Recommended Posts

All of the posts with instructions on how to do the pink wire mod refer to the Rick Ramsey site.

The site is down right now. So could someone explain how to do this?

Share this post


Link to post
Share on other sites

The site worked for me. Here's the info anyway.

The pink wire mentioned in the 'Closed Course Competition Modifications' section above is not shown on the electrical diagram in the Owner's Manual or the Service Manual. TomM provided proof of it's existence with several pictures.

PinkWire1.jpg

PinkWire2.jpg

When removing the pink wire, it helps to separate the two halves of the natural-colored coupler. Then, use a paper clip or small probe to reach inside the half with the pink wire and release the small strip of metal which locks the pink wire end-pin in place. The pink wire and end-pin will then slip out of the coupler. Re-insert the pink wire into the adjacent empty slot so it doesn't just dangle in the breeze. Or make a K-dub switch like I did at More Mods, last panel.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×