Jump to content
Sign in to follow this  

help me please

Recommended Posts

i changed my fork seals in my 01 250f last week.put what i thought was the right amount of oil in it , but i rode a hare scramble sunday and thought my front end was gettin hard toward the end.came home and changed my fork stem barring just for the heck of it,whene i put it all back together i noticed th front end was hard as a rock,i didnt tighten the fork bolt to tight. the scramble was real rocky and rough any good help will be appreciated. thanks steve

Share this post


Link to post
Share on other sites

Make sure that your forks are exactly the same ht. in the clamps and that your R/S fork is not bound up on the axle. You may also want to take your fork caps off and springs back out to double check your fork oil ht. You can do this while they are on the bike. If your not familiar with setting oil ht. on KYB's you might just have to much oil in them. Seen it many times.

doc

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×