Jump to content
Sign in to follow this  

BBR parts

Recommended Posts

you are gonna need to do something with the rear to keep the bike ballanced. If you are not using the BBR rear linkage, run the forks up in the clamps ~1 inch.

Share this post


Link to post
Share on other sites

I've got the triple clamps (not the fork springs), but they were on the bike when I bought it. So....I'm absolutely no help! :cry:

Share this post


Link to post
Share on other sites

WEhats the recommended sag on the rear shock?

3.5" should do from the axle bolt to a point that is constant on the bike. I used the cross point where the numberplate and the rear fender cross.

Share this post


Link to post
Share on other sites

hi just ordered a BBR triple clamp and fork springs, anybody using these and what do u think of them

I'm running the BBR clamp and rear linkage on my CRF. They are nicely made. To improve fork action, depending on your weight, you might want to try some 15wt or 20 wt oil. You can also try running one stock spring and one BBR spring in the front. Better yet, get some Race Tech gold valves.

With the clamp and rear link, you gain about 1 inch of ride height. The rear shock needs help. Either have it revalved or pop for a Works Performance shock.

Share this post


Link to post
Share on other sites

i order a spring for my bud he don't have a pc we got the BBR shock spring and he loves it, i get all my stuff for my 50 from here i need some springs to the stock springs are killing me he has stuff for 150 and 230 heres the link www.mx-performance.com :cry:

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×