Graphics Kits

The Wife is letting me get a new seat/tank combo for my B-Day. (Even payed for half)

I ordered the Clarke tank (blue) and the IMS seat (SDG is up to $93, & I like the blue) :)

I wants to get some graphics for the tank and rad shouds but don't know what will fit the 3 Gal. tank. The YZ stickers look too small.

If I understand you question correctly. Any YZ graphic will fit the Clarke tank just fine. They dont look to small.

Ok, I just placed an order for a Factory Effex Graphic kit. Now I need to figure out the best way to install them. I have been searching the archives and it looks like hair dryer and solvent to remove old sticker, then wash with soap and water, then a 50/50 mix of water and rubbing alcohol to install.

Let me know if I am missing anything.

I read a tip on one of the sites I was shopping at and it said to ride the bike for at least 3 days before installing the graphics to let the vapors help get the plastic ready for install. Does this sound correct I read contradictory posts on this here at TT.

Thanks Greg C.

Your right on. I would caution against using the solvent (ie brake cleaner) until you've tried the hairdryer. WD-40 would be a better choice. Solvent generally dulls the finish, OK if the graphic is hiding it, but not so good looking if it's exposed.

70/30 water/rubing alcohol works real well. Spray both the part and sticker.

Yes, let the tank have maybe 2-3 weeks to vent first.

Sounds like you've got it covered!

Cool, Thanks for the input.

Hey Greg,

I just installed graphics on my bike. I used Windex and a bondo spreader. I squirted the windex on and squeegied the windex out. They stuck great and no bubbles.



99 WR400f, YZ timed, MX-Tech suspension, Scotts steering damper, White Bros E-Series (12 discs), tapered header and a/f. Kouba T-handle for the fuel screw. Works Connection billet throttle tube and frame guards. Cycra Pro-Bend, triple clamp mount handguards. Thumper Racing rad guards, Renthal Jimmy Button highs, YZ Tank and IMS seat, YZ number plate, odo removed, EKP, 48PJ, 175MJ at 500-1000' Thanks James Dean!

Hold the presses. I consider my self a pro... :) all that stuff works ok but I'm telling you nothing works better than a bath tub and some hot water. You can stick and unstick the graphics as may time as you want...

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now