Jump to content
Sign in to follow this  

help with jetting 01 WR250F

Recommended Posts

I have a 01 WR250F with the exhaust baffle removed, the gray wire cut, the throttle stop cut,the air box lid removed, a 03 YZF cam installed with YZF timing and I live in California with an elevation of 0-2000ft. this being my first bike I know little about jetting a am wondering if anyone out there can help? punksucks846@yahoo.com

Share this post


Link to post
Share on other sites

Please read the manual carefully for an explanation of each carburetor component.

Try adjusting the idle mixture first to see if you can get an improved idle and then check the other settings to be sure they are still stock.

James

Share this post


Link to post
Share on other sites

I just bought my 01 wr250f, did almost the same mods. I ran stock 02 yzf250 jetting, difference in mods was blue wire, air cut valve, stock yzf exhaust. read my post under 2001 wr250f jetting/mods.

Good luck, Joe Ramona ca.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×