Saturday's ride at Rocket...

I just want to say that the track was perfect...til it rained. :cry: I was going to stay as long as I could hold on to the bars, but the rain came down for a good long time about 12:30. Felt bad for Mark. You could really tell he put some time in before we got there in the morning. Oh well, no that I know how to get there I will be going more often. I had no clue how good that place was. Just hopefully next time it won't rain! :cry:

Create an account or sign in to comment

You need to be a member in order to leave a comment

Create an account

Sign up for a new account in our community. It's easy!

Register a new account

Sign in

Already have an account? Sign in here.

Sign In Now

  • Similar Content

    • By woodsrider4
      Has anyone around New Jersey heard of Lepis Land? I found people talking on other forums about it and how riding there is by donation only. Does anyone have anymore information about it or a phone number to contact them?
    • By Agitator
      10/17/08 UPDATE! I posted more photos on page 2. Not all pictures are on page 1. I will constantly be adding more photos as I go along.
      Many of you have heard of my starting/idle problems with the 610. Carburetion has been ruled-out time and time again. I sensed something else was going on. The engine has never wanted to idle down, sounded like there was a load on it even in neutral. Since I had metal filings in my oil when I first got it, I have now decided to overhaul it and make everything ship-shape. It turns out that I was correct- there is some valve damage that I will talk about later.
      I don't like to take apart dirty engines and get the dirt inside 'em

      A little gross.

      My cleaning station:

      A little better now

      Clutch removal:

      after removing springs

      bottom of pressure plate

      everything looked decent as far as wear

      after removing plates

      basket after removing hub

      Area after removing basket.

      Removing the starter gear with snap ring pliers

      More to come. I'm uploading pictures of the case splitting, etc...
      I'll try to ease off on the photo-over-obsession. The next batch of info/photos will be a little more interesting.
      Comments and suggestions are appreciated. I'm already ordering parts from George so before I know it, I'll be just waiting on new parts (after a little more cleaning.
    • By revitup
      We're headed to Doublin Gap on Saturday this time. Forecast is shaping up good so far.
      Picture from last week...