Jump to content
Sign in to follow this  

Does anyone know what new 04 CRF150 Roller chassis go for ?

Recommended Posts

I might be parting out a 1 month old 04 CRF150 except the motor cause I am doing a CR85 Swap.

Does anyone know what typical like new Roller chassis go for ? Trying to decide if I should sell it as a roller or part it out.

Does anyone need anything for there CRF ?? Interested in a roller possibley ?

Email me Rittiman@comcast.net

Dave

Share this post


Link to post
Share on other sites

How much do you want for it ?

where is that track at the garahans off bear creek ?

Dave

Share this post


Link to post
Share on other sites

How much do you want for it ?

where is that track at the garahans off bear creek ?

I bought a complete XR200 for $550.00 I thought I would do something with it...

The G-bros, I heard Dec 5th they might have a 100 race/fund raiser.

fund503.jpg

Share this post


Link to post
Share on other sites

Does the motor run and what kind of condition is it on ?

Any idea of what year it is ?

Dave

Share this post


Link to post
Share on other sites

I got it running and found out it sometimes will not downshift. I took the side cover off and think I need to replace the shift selector and spring. I think it's a 1995. What do you want for the complete roller CRF150? Or are you now interested in buying what I have?

xr200left.jpg

Share this post


Link to post
Share on other sites

Trying to sell off the roller for $ 1000 bucks if possiblle. There is someone that might be interested in it and he might even want the motor or bike from you and put it in the 150 Chassis. ( you could have a 04 150 with the 200 motor in there ) I beleive they are a complete bolt in swap over )

You know any one insterested in the Roller ? Its only a

Share this post


Link to post
Share on other sites

Rollers go for $900 - $1200. XR200 motors bolt right in and work great. Although, if I remember you need a 428 rear sprocket and chain.

Share this post


Link to post
Share on other sites

you might be better off just doing the conversion with the CRF chassis

The forks bolt right up and with a little fab work the rear swingarm will fit (you need an expert rear swingarm for 17in wheels if you are doing it for motard purposes. If you are doing it for dirt, I have a CR80 rear swing arm with all the hardware, and an excel 17X3.5 in wheel with a rad hub. I was going to do the conversion, but I have the standard swingarm and the wheel won't fit.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×