Jump to content
Sign in to follow this  

Remove the coast enrichener??

Recommended Posts

On the DRZ page, it suggest removing the coast enrichener? With my mods, the bike still bogs if I snal the throttle from a 1/4 open or less. Will this help? Thoughts? Buhler? 😢

Share this post


Link to post
Share on other sites

I removed it and did the recommended jetting changes.

I do not have the bog anymore.

Share this post


Link to post
Share on other sites

I removed it and did the recommended jetting changes.

I do not have the bog anymore.

Cool. The jetting's been done. I know what Im doing tomorrow! 😢

Share this post


Link to post
Share on other sites

hold up!the jetting is different then what you have done!

you cannot just take the CE off.you have to do the corresponding jetting set up as well.

Share this post


Link to post
Share on other sites

sorry I was not clear, you have to rejet if you take the coast enricher off.

my set up at sea level is:

Main Jet 165

PAS (pilot air screw) 5/8 turn out - purchased from sudco instead of getting pilot air jet.

pilot jet 40

fuel screw 2.5 turns out

this is with whitebrother R4 exhaust and WB header pipe.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...