Jump to content
Sign in to follow this  

Skip #7 grease zerk in steering head

Recommended Posts

Mine works great I have done it to several of my buddies as well,I drill a hole and tap a 1/4 x 28 threads per inch then install a zerk,I give it a pump or two a month,when full it will seap at the bottom and just under the top clamp,I myself use white lithuim lubraplate grease.I drill the hole on the left side about half way down the head stay.

Share this post


Link to post
Share on other sites

thats cool, ever have a problem like affecting the strengh by driling that hole. or any problems with oil always wanting to get on your fender

Share this post


Link to post
Share on other sites

Yes if you over grease it will ooze out on your fender a bit ,usually once then wipe it off and it's done until the next months grease job,I have done this on my hondas since 96 ,my 98 ,00 02 now 05 no problems just use the small 1/4x28 thread zerk.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...