Jump to content
Sign in to follow this  

RM rear brake = DRZ rear brake?

Recommended Posts

Is the 03 RM125's rear brakeset (caliper, pedal, master cylinder) a bolt on fit to the DRZ? Thanx!

Why would you want to do that ?

Share this post


Link to post
Share on other sites

99 onwards RM use a 240mm rotor.

DRZ and pre 99 RM use a 220mm rotor.

Bigger rotor, stronger braking effect.

Also big rotors look cool 😢

Share this post


Link to post
Share on other sites

I'm juz wondering if it will fit. I've taken the carrier for myself already and a new Braking 03 RM wave rotor cheap from ebay.

If the 03 RM rear brakeset will fit on a DRZ, I could pass it on to whoever needs it here in Singapore. So will it fit a DRZ? Master cylinder, pedal, brakelines, caliper, pads the whole lot... thanx!

Share this post


Link to post
Share on other sites
No they are not.

thanks for the reply.

the part numbers for the pedal(end piece only) are the same 43110-43d00

the part numbers for the arm are slightly different.

2000 rm 250 is p/n: 43120-37e00

2004 drz400 is p/n: 43120-29f10

"hardrider's" post(2nd one from top) stating the '99-01 is the same is incorrect then?

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...