Jump to content
Sign in to follow this  

Magura Hydro Clutch Installation

Recommended Posts

Does anybody have any tips on installing a Magura hydraulic clutch on a DRZ400E? I'm having a little trouble getting it to work right. Should there be tension on the clutch arm when it is engaged? 😢

Share this post


Link to post
Share on other sites

Umm, when it's engaged,, there better be tension on the arm,, other wise it would not be engaged 😢

There should be free play at the arm/clutch engagement with the lever at rest.. just like with a cable.

You set that by placement of the arm on the spline shaft,, and the spoke nipple looking part on the end of the slave cylinder.

Share this post


Link to post
Share on other sites
😢😢 just a few mm at the arm once the freeplay is taken up. Total movement at the arm from installed resting position to full slave cylinder stoke is about 10~15mm. Id have to look and measure tonight to be real sure,, So that is just an educated guess right now.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...