njyamahauler Posted December 16, 2004 Does anyone know who makes one for the EXC that mounts horizontally and will hold up to hard riding? Share this post Link to post Share on other sites
rancheroracer Posted December 17, 2004 Check this site: http://www.cyclegear.com/dept.cfm enter license plate bracket in the search window Share this post Link to post Share on other sites
KevinG Posted December 17, 2004 I got mine through my dealer. You can see it in the parts catalog at www.ktmworld.com. NUMBER PLATE CARRIER SHORT 04 (Part number 54808015000) for $16.60. I had the long one (stock) and it was broken and both rear turn signals were gone after my first 30 minute trail, but I fell twice. Share this post Link to post Share on other sites
njyamahauler Posted December 17, 2004 I got mine through my dealer. You can see it in the parts catalog at www.ktmworld.com. NUMBER PLATE CARRIER SHORT 04 (Part number 54808015000) for $16.60. I had the long one (stock) and it was broken and both rear turn signals were gone after my first 30 minute trail, but I fell twice. Kevin, thanks for the info. I went to the ktmworld site and I wasn't able to locate a pic of the bracket. I did find the listing for it though. By chance do you have a pic of it? Thanks Share this post Link to post Share on other sites
KevinG Posted December 18, 2004 Ya, you're right, the parts search doesn't have a picture and it's sort of hard to find. I have a pic of it on my bike here http://photos.yahoo.com/kgerland1 in the "Rides" folder (last pic) but there's not much to see. It's all under the fender and covered by the license plate, which runs off the picture. You can see my broken stock bracket in an earlier pic too. Try the KTMWorld page again. There is a diagram of it there. From the main page, click on the parts catalog. Change your year on the next page and click on the BIKE DESCRIPTION for your bike. Click on "Mask, Fender Racing" on the next page and you'll see a diagram that shows two brackets. You are looking for #30. Share this post Link to post Share on other sites
njyamahauler Posted December 18, 2004 Thanks again! By the looks of those ride pics that was quite an experience! Share this post Link to post Share on other sites
wjc2003 Posted December 18, 2004 I cut a piece of mudflap (semi tractor) to fit the plate.It will last for the next 30 years or more. Share this post Link to post Share on other sites
motojohnny Posted December 23, 2004 By the looks of those ride pics that was quite an experience! Is that Cambodia? I did a ride there. Awesome. Thailand as well. Share this post Link to post Share on other sites
KevinG Posted December 25, 2004 Is that Cambodia? I did a ride there. Awesome. Thailand as well. My ride pictures are taken in Malaysia. I live in Singapore and Malaysia is about 20 minutes away. I looked at the Cambodia tour online last week. It looks like a lot of fun. Share this post Link to post Share on other sites
