Jump to content
Sign in to follow this  

##$$%^$%##$%$% Carb

Recommended Posts

OK, 03 S model 3x3 yosh system 145 main. My bike has run well, but not quite dead on since I did the mod. It tended to run lean, even with the bigger jet at freeway speed. I pulled the carb off and well I screwed up and got the washers backwards, so I put the thick one on the bottom as per instructions. It hesitates when I pour on the throttle. If it is idling and I blip it it dies. I believe I need to reduce the main jet, or is that adjustable in the fuel screw? I am thinking re jet, but want to make sure before I pull the carb apart again. BTW I can now pull it apart with only the gas tank off. Thanks for the feedback.

Share this post


Link to post
Share on other sites

if those washer are in place correctly, try to fine tune ya fuel screw, this is where the problem sounds.

main jet only affect from 1/2 throttle onward.

hope this help 😢

Share this post


Link to post
Share on other sites
if those washer are in place correctly, try to fine tune ya fuel screw, this is where the problem sounds.

main jet only affect from 1/2 throttle onward.

hope this help 😢

Thanks, it does help. 😢

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×
×
  • Create New...