Jump to content
Sign in to follow this  

Feb. 18th El Cajon MX Park Mini X

Recommended Posts

1107460727_minix_color.jpg

Mini X Classes

Feb. 18th 2005

@

www.elcajonmx.com

Note All classes are created for these bikes. If a Chinese version qualifies it will be listed that it can contend!

CRF/XR50, Z50s/TTR90/CRF/XR70, CRF/XR80, CRF/XR100, CRF150, KLX/DRZ110, TTR125, KLX/DRZ125

Amateur Classes prizes for 1-3rd

1. 200lbs and over open 10" rear wheel(sdg, sikkmx, icon, extreme, ect allowed)

2. 30 plus open 10" rear wheel(sdg, sikkmx, icon, extreme, ect allowed) all mods allowed

3. 50 Super Stock 10" rear wheel(must use stock barrel bore and stroke! Cheater will be disqualified with no refund!) All other mods allowed. Icon 50 allowed

4. 88 Super Stock 10" rear wheel(must use stock stroke and Honda stock CRF50 head)

5. Amateur Open 50 based chassi class 10” rear

wheel

(sdg, sikkmx, icon, extreme, ect allowed)

6. Amateur Open Midsize (CRF/XR70, Extreme 107 Big Wheel, TTR90 allowed KLX/DRZ110)

7. Big Wheel Open (CRF/XR80, TTR125, KLX/DRZ125 and CRF150)

8. Kids Class all bikes and sizes (7-11yrs old)

PRO Classes- 16 and older! 100% payback paid to top 33%

1.PRO 50 Open All 50 based bikes including look alikes! 10” rear wheel required!

2. PRO Midsize (CRF/XR70, Extreme Big Wheel, TTR90 allowed KLX/DRZ110)

3. Big Wheel Open (CRF/XR80, TTR125, KLX/DRZ125 and CRF150)

Share this post


Link to post
Share on other sites

New vendors and sponsors jumping on daily! A press release will be issued Friday with updates

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

  • Similar Content

    • By riverside21
      Has anybody purchased/used one of these Arrowhead IHA6017 cdi boxes??  I tried 2 different ones of these on a 1987 and 1994 XR200R, and the bikes won't even start.  Bikes just pop and backfire, had to put the old cdi's back on.  I noticed when I ordered the boxes they stated "advance ignition curves" in the specs.  The box is also much bigger than the stocker and won't fit in the rubber mount.  I didn't mess with moving around the timing to try and get these to work....I just sent them back.  
    • By riverside21
      Recently picked up a 1987 xr200r in pretty good condition, all stock.  The carb was all gummed up and running real rich, and the previous owner removed the baffle and end cap from the exhaust, but left the air box top chute in place.  I cleaned up the carb and verified all stock jetting, needle position, air screw, etc.  Where we live the quieter the better for off-roading so I ordered a new baffle and end cap, but did ride the bike for a week before the parts arrived.  With the muffler parts out I had a brown plug and plenty of power throughout the entire throttle range.  Got the muffler parts, installed them and now the bike falls flat while climbing hills and gradually rolling on the throttle, I get a burble at low speed sometimes and I have a black sooty plug.  I'm kind of at a loss on this one.  I realize that the parts restricted the exhaust....but it's basically back to stock and I've had these bikes stock before and they ran fine.  Seeing as I have all stock jets and am getting a sooty plug, I'm wondering if electrics are weak?  I also tried adjusting the air screw in/out and moving the needle clip to position 2, either of the two made my problem worse.
      Any ideas?
    • By riverside21
      So the other day I notice that the rear shock spring on our 1994 xr200r had cracked and separated about 2 coils from the top.  No big I thought....just go on Ebay and pick something.  Well, after a few days of looking I can't find ANYTHING used or aftermarket!  The stock Honda spring #52401-KT0-691 is "no longer available".  Can anybody lead me in the right direction to get a replacement spring for this bike??
      Thanks in advance.
    • By hondamaster1
      I have a 1999 xr200r. I used to ride it like a champ than i stored it for a year getting it out once in a while to run. Than i took it out a couple days ago started it and it ran and died instantly. I cleaned out the carb put everything back together and still sane thing. You have to feather the throttle to keep it running. It also made a loud pop and it jerks you when you ride it. I changed the spark plug, cleaned the carb, and put new gas in the tank. Any ideas? Wanted to ride it this weekend...
    • By Wayno50
      Nostalgically bought this bike because it’s same model/year/size of what I had as a kid in the early 90s. I should have looked closer but was blind to its issues. Kid before removed tailpipe and put on a silly silencer which I just threw in the trash. Thankfully he kept track of OEM tail pipe but cut the end off of it.. I can only guess to make it louder. I have pipe back on bike but back pressure not good and sound not as tight as it should be. Does this need packing? Can I get a retrofit tip for the jagged 3” end?

×