Jump to content
Sign in to follow this  

Need standard jetting settings please 01wr250f

Recommended Posts

My bike has a pipe and airbox lid removed thats about all the mods i can see i bought it second hand. Now why i ask about jetting is because its hard to get it to idle, i may get it to idle when sitting there playing with the idle screw but as soon as i take it for a quick run and i pull up it idles high then just wants to stall please help

Share this post


Link to post
Share on other sites

A high and irregular idle speed is usually lean from too much air or lack of fuel. Check for air leaks around the manifold clamp, then turn the fuel screw outwards on the bottom of the float bowl. Do not go more than 3 turns out from fully turned in. Turning outwards richens the idle with more fuel.

Try readjusting the idle speed after turning the fuel screw. The idle should come down relatively quick and stay steady.

Make sure the throttle cables are not binding too.

James

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×