Jump to content
Sign in to follow this  

mx tech help!! subtank issue

Recommended Posts

my subtanks(mxtech-wilkey)were leaking oil at the air/oil valve on the top of the fork leg. twisted it with my hand using the subtank, and it broke off in the cap.. i need one of those male to male fittings. appears to be sae. can i find that at lowes hardware? ktm 450sx done in early 04 (mugans bike)

Share this post


Link to post
Share on other sites

You should be able to take an easy out and remove it . It already has a hole in it to put the easy out in . Install a ew end ,use some teflon tape or pipe sealer to get it to stop leaking the oil.

Share this post


Link to post
Share on other sites

Look in the Yellow pages for "hose". I found a local place that specializes in all type of hose. They sell the fittings. I believe they are intended to be used for hydralic lines. I believe I paid about 1.00 per fitting.

Share this post


Link to post
Share on other sites

Create an account or sign in to comment

You need to be a member in order to leave a comment

Reply with:

Sign in to follow this  

×